Toshiba A200 manual Wireless LAN antenna Replacement Procedures, Installing a wireless LAN antenna

4.24 Wireless LAN antenna 4 Replacement Procedures

2.Peel off the one acetate tape and four insulators and take out the wireless LAN antenna cables from the hinge hole.

Insulator

Acetate tape

Wireless LAN antenna cable

Figure 4-47 Removing the wireless LAN antenna cable

Installing a wireless LAN antenna

To install a wireless LAN antenna, perform the following procedure. (See Figure 4-46 and 4- 47.)

1.Pass the wireless LAN antenna cables through the hinge hole and lay down the cable in place. Fix the wireless LAN antenna cables with the one acetate tape and four insulators .

2.Stick the wireless LAN antennas on the LCD cover in place and fix the antenna cables with the acetate tapes at four points.

Caution: When installing antenna cables, do not cross them on the LCD cover.

PORTEGE A200 Maintenance Manual (960 -499) 4-57