Toshiba A200 manual Replacement Procedures4.25 Hinge assembly, Removing the hinge assembly

4 Replacement Procedures4.25 Hinge assembly

4.25 Hinge assembly

Removing the hinge assembly

To remove the hinge assembly, perform the following procedure. (See Figure 4-48 and 4-49)

1. Remove the following screws fixing the hinge assemblies on the LCD cover side.

?	M2.5? 6	Tapping screw	? 2 (left? 1, right? 1)
?	M2.5? 4B	FLAT HEAD	? 2 (left? 1, right? 1)

M2.5? 4B FLAT HEAD

M2.5? 6 Tapping

Hinge assembly

M2.5? 4B FLAT HEAD

Hinge assembly

Figure 4-48 Removing the hinge assembly (LCD cover side)

2. Remove the following screws fixing the hinge assemblies on the base side.

? M2.5? 4B FLAT HEAD ? 4

Caution: Silicon grease is applied to screws on the base side. Drive the screws a little strongly.

4-58 PORTEGE A200 Maintenance Manual (960 -499)