Toshiba A200 manual Replacing TMD fluorescent lamp8

4 Replacement Procedures 4.26 Fluorescent lamp

2.Assembling PCB ASSY <Procedure>

1)Back light unit for replacement

Remove the peeled-tape on the double-sided tape at the upper of frame.

2)Light the backlight on.

3)Make sure that there is no dus t, foreign object, scratch and like that on the backlight and the back of cell. Set the PCB-ASSY cell on the back light unit.

Caution: 1. Push it as far as it will go at the left upper. 2. Do not damage the TAB.

Cell with PCB

	Back light unit
Push as far as it will go.

Remove the peeled tape on the double-sided tape

Figure 4-57 Replacing TMD fluorescent lamp(8)

4-68 PORTEGE A200 Maintenance Manual (960 -499)