Toshiba A200 manual Fluorescent lamp Replacement Procedures, Disassembling the module

4.26 Fluorescent lamp 4 Replacement Procedures

4.26.1 Replacing the 12.1 inch TMD fluorescent lamp

The following describes the procedure for replacing the fluorescent lamp. (See Figure 4-50 to 4-61.)

Disassembling the module

1.Peeling of tape and insulating sheet <Procedure>

1)Put quietly the module on a flat plate without foreign objects with the front up. Check for dusts on the desk to protect the module from being scratched. Put a protection sheet (soft cloth) on the surface.

2)Peel off two tapes fixing FL cable and one bezel tape on the lamp side in order.

Caution: Be careful not to damage the TAB.

Bezel tape on the lamp

Tape fixing FL cable

side

Figure 4-50 Replacing TMD fluorescent lamp(1)

PORTEGE A200 Maintenance Manual (960 -499) 4-61