3 Tests and Diagnostics | 3.2 Executing the Diagnostic Test |
3.2Executing the Diagnostic Test
To start the DIAGNOSTIC PROGRAM, follow these steps:
1.Insert the Diagnostics disk in the floppy disk drive.
2.Insert the Diagnostics disk in the USB floppy disk drive and turn on the computer while pressing U key. Then, press Enter and the following menu appears.
Microsoft Windows XX Startup Menu
1.Repair Main (T&D)
2.Repair initial config set
3.Repair Heatrun (T&D)
Enter a choice: 1
To start the Diagnostics menu (T&D), press 1 and Enter.
To start the H/W initial information setting tool, press 2 and Enter.
To start the Heatrun test, press 3 and Enter.
Note: After replacing the system board or CPU, it is necessary to execute the subtest 01 Initial configuration in 3.3 Setting of the hardware configuration.
3.2.1 Diagnostics menu (T&D)
To execute this program, select 1- Repair Main (T&D) in the startup menu, press Enter. The following menu appears.
TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX
DIAGNOSTICS MENU :
1 - DIAGNOSTIC TEST
2 – ONLY ONE TEST
3-
4- HEAD CLEANING
5- LOG UTILITIES
6- RUNNING TEST
7- FDD UTILITIES
8- SYSTEM CONFIGURATION
9- EXIT TO
PORTEGE A200 Maintenance Manual |
