Toshiba A200 manual Optical drive Replacement Procedures, Installing an optical drive

4.7 Optical drive 4 Replacement Procedures

2.Turn over the computer and insert a screwdriver into the hole from the space for a battery pack to push the rear of the optical drive.

Driver

Hole for removing optical drive

Optical drive

Figure 4-10 Removing the optical drive (2)

Caution: Be careful not to damage the computer by the driver.

Installing an optical drive

The following describes the procedure for installing an optical drive. (See Figure 4-9 and 4- 10.)

1.Insert the optical drive into the slot and push it slowly until it is surely connected to the system board.

2.Turn over the computer and fix the optical drive with the following screw.

? M2.5? 12B FLAT HEAD screw ? 1

PORTEGE A200 Maintenance Manual (960 -499) 4-17