Toshiba A200 manual Replacement Procedures Memory module, Removing the memory module

4 Replacement Procedures 4.10 Memory module

4.10 Memory module

Caution: The power must be turned off when you remove the memory module. Removing a memory module with the power on risks damaging the module or the computer itself.

Do not touch the memory module terminals. Any dirt on the terminals may cause memory access problems.

Never press hard or bend the memory module.

Removing the memory module

To remove the memory module(s), confirm that the computer is in boot mode. Then perform the following procedure. (See Figure 4-16.)

1.Turn up the insulator and open the latches fixing the memory module.

2.Remove the memory module.

Latch

Insulator

Memory (slot B)

Latch

Memory (slot A)

Figure 4-16 Removing the memory module

4-24 PORTEGE A200 Maintenance Manual (960 -499)