Toshiba A200 manual Replacement Procedures Connector panel, Removing the connector panel

4 Replacement Procedures 4.5 Connector panel

4.5Connector panel

Removing the connector panel

The following describes the procedure for removing the connector panel. (See Figure 4-5.)

1.Open the connector panel.

2.Push the center of the connector panel to bend it and remove the connector panel.

Connector panel

Figure 4-5 Removing the connector panel

Installing a connector panel

The following describes the procedure for installing a connector panel. (See Figure 4-5.)

1.Bend slightly the connector panel at the center. Insert the ends (projections) of connector panel to the two installing holes of the base.

2.Close the connector panel.

4-12 PORTEGE A200 Maintenance Manual (960 -499)