Toshiba A200 Replacement Procedures Wireless LAN module, Removing the wireless LAN module

4 Replacement Procedures 4.11 Wireless LAN module

4.11 Wireless LAN module

Removing the wireless LAN module

To remove the wireless LAN module, perform the following procedure. (See Figure 4-17.)

1.Peel off the glass tape on the wireless LAN antenna cables.

2.Remove the white and black antenna cables from the wireless LAN module using a dedicated jig.

3.Open the latches fixing the wireless LAN module and remove the wireless LAN module.

Glass tape

Latch

Antenna cable (white)

Antenna cable (black)

Wireless LAN module

Figure 4-17 Removing the wireless LAN module

Installing a wireless LAN module

To install a wireless LAN module, perform the following procedure. (See Figure 4-17.)

1.Insert the wireless LAN module into the connector of the computer slantwise.

2.Push down the wireless LAN module until it is latched firmly.

4-26 PORTEGE A200 Maintenance Manual (960 -499)