Toshiba A200 manual MAC Address Check OK

3.27 Wireless LAN Test Program (Askey-made)			3 Tests and Diagnostics
Subtest02	MAC Address Check
	This subtest reads out the MAC address of the card installed and confirms if it is
	valid. When the MAC address is valid one, following message will appear in the
	display.
	*************************************************************
	*	MAC Address Check : OK !!	*
	*		*
	*		*
	*************************************************************
	Press any key to return to the test menu.
	When a defective is detected in the test, following typical cause is considered.
		? Connection of wireless LAN card
		? Defective wireless LAN card
		? Disappearance of MAC address data
	Check the connection and execute the subtest again.
Subtest03	Communication test of 11a mode (MB44ag)
	This subtest checks the connection and communication of wireless LAN antenna of
	Atheros 802.11a mode. Check the number of packets, throughput and RSSI and
	compare them with the standard.

After finishing the test, OK message will appear in the display. Press any key to return to the test menu.

When a defective is found during the test, NG message will appear in the display. Press any key and following message will appear in the display.

************************************************************

*		*
*	11a Communication Test : NG !!	*
*		*
*	Please refer to log. txt	*
*		*

************************************************************

Press any key to return to the test menu.

When a defective is found, open the log file (log.txt) and check the result.

PORTEGE A200 Maintenance Manual (960-499) 3-63