4 Replacement Procedures

4.19 SD board/System board

4.19 SD board/System board

4.19.1SD board Removing the SD board

To remove the SD board, perform the following procedure. (See Figure 4-28.)

1.Disconnect the SD cable from the connector PJ 9550 on the system board and from the connector PJ9555 on the SD board.

2.Remove the SD board.

PJ9555

SD cable

SD board

PJ9550

Figure 4-28 Removing the SD board

Installing a SD board

To install a SD board, perform the following procedure. (See Figure 4-28.)

1.Connect the SD cable to the connector PJ9555 on the SD board.

2.Connect the SD cable to the connector PJ 9550 on the system board and set the SD board in place.

4-38

PORTEGE A200 Maintenance Manual (960 -499)

Page 243
Image 243
Toshiba A200 manual Replacement Procedures SD board/System board, SD board Removing the SD board, Installing a SD board