Toshiba A200 manual Removing the LCD support, Installing a LCD unit

4 Replacement Procedures		4.22 LCD unit
4. Remove the following screws and detach the LCD supports from the LCD unit.
? M2? 3C S-THIN HEAD screw		? 4
		M2? 3C S-THIN HEAD
	LCD support (right)

M2? 3C S-THIN HEAD

LCD support (left)

Figure 4-40 Removing the LCD support

Installing a LCD unit

To install a LCD unit, perform the following procedure. (See Figure 4-38 to 4-40.)

1. Set the LCD supports to the LCD unit and fix them with the following screws.

? M2? 3C S-THIN HEAD screw ? 4

Caution: The shape of the right LCD support is different from the one of the left. Use the correct LCD support.

2.Connect the LCD cable to the connector on the back of the LCD unit and fix it with the glass tape .

3.Set the LCD unit on the LCD cover with the guide into the guide hole and fix it with the following screws.

? M2? 4Z S-THIN HEAD screw ? 6

4-50 PORTEGE A200 Maintenance Manual (960 -499)