4.26 Fluorescent lamp | 4 Replacement Procedures |
5.Fixing PCB and bezel with screws <Procedure>
1)Fix the right side ( 2 points, viewing from the back) with screws in order of ? and
?.
2)Fix the left side ( 2 points, viewing from the back) with screws in order of ? and
?.
Caution: 1. Keep the order of screwing. No floating shall be.
2.The torque of screw driving shall be 0.1666N/m (1.7Kgf.cm).
3.Use a Phillips screwdriver with the bit of No.
??
??
Figure 4-60 Replacing TMD fluorescent lamp(11)
PORTEGE A200 Maintenance Manual (960 |
