Toshiba A200 manual See the Specification of the Bluetooth System in detail

3.28 LAN/Modem/Bluetooth/IEEE1394 Test Program 3 Tests and Diagnostics

Table 3-6 Error code for Bluetooth test (BD_ADDR) (2/2)

Error code	Meaning
0x20	Unsupported LMP Parameter Value.
0x21	Role Change Not Allowed.
0x22	LMP Response Timeout.
0x23	LMP Error Transaction Collision.
0x24	LMP PDU Not Allowed.
0x25	Not Exist
0x26	Not Exist
0x27	Not Exist
0x28	Not Exist
0x29	Not Exist
0x2a	Not Exist
0x2b	Not Exist
0x2c	Not Exist
0x2d	Not Exist
0x2e	Not Exist
0x2f	Not Exist

** See the Specification of the Bluetooth System in detail.

Subtest03 Communication test (DUT mode)

Subtest T Communication test (TEST mode)

This subtest checks the Bluetooth communication functions. Set the responder machine to DUT mode and tester machine to TEST mode.

Insert a floppy disk containing the test program into the responder machine and turn on the power. The Bluetooth test menu will appear.

Press 3 to select the test and press Enter of the responder machine. The following message will appear:

When the test begins, the machine displays BD_ADDR of the DUT. The progress bar appears when the preparation is completed. The following message is displayed.

----------------------------------------------------------------------------

-

Bluetooth Subsystem T&D for PCSE(CS-Air) VerX.XX Copyright (C) by TOSHIBA Co.

----------------------------------------------------------------------------

-
+	----------------------	+
	DUT		BD_ADDR of the DUT = XXXXXXXXXXXXX [h]
+	----------------------	+

PORTEGE A200 Maintenance Manual (960-499) 3-73