Eicon Networks DIVA LAN ISDN manual

Chapter Nine: Advanced Installations Making a V.120 connection 137

8.Click More. You will see the V.120 Dialing Script page:

9.This page contains a pre-defined script that you can modify for your installation. When the V.120 connection is established, this script is automatically run to complete the log in process. Consult your ISP to determine the sequence of events that occur during the log in process. Then modify this script accordingly. The following commands are available:

•Send: Sends the specified text to the remote. Enter up to 33 alphanumeric characters.

•Send username: Sends the Local username (set on the Authentication page) to the remote.

•Send password: Sends the Local password (set on the Authentication page) to the remote.

•Wait for: Pause script execution until the specified text is sent by the remote system. Enter up to 33 alphanumeric characters.

•Delay: Pauses script execution for the specified number of seconds. Range: 1 to 255 seconds.

•Timeout: If the next script event does not complete within the time specified, the script is aborted.

Range: 1 to 255 seconds.

•Abort: End the script.

10.Click Save.

11.Click Finish.

12.Click Reset.