Barco 26-0702000-00 bå~ÄäÉ=aÉëÅêáéíáçåë, jLb=N=~åÇ=jLb=O=bå~ÄäÉë, Menu Orientation, • • • • •

5. Menu Orientation

Memory Menu

bå~ÄäÉ=aÉëÅêáéíáçåë

This section provides descriptions of each module’s Enables.

Note

All Enables can be toggled on or off, without restriction.

The following topics are discussed:

•

•

•

•

•

M/E 1 and M/E 2 Enables

PGM Enables

System Enables

Aux Enables

DVE Enables

jLb=N=~åÇ=jLb=O=bå~ÄäÉë

The figure below illustrates the available Enables when the M/E 1 or M/E 2 module is selected. Both sets of Enables are identical — only the section title changes.

Figure 5-61.M/E 1 and M/E 2 Enables

Note

Remember that on the FSN-150, M/E 2 control must be enabled to utilize the M/E 2 memory module. In Chapter 7, refer to the “M/E 2 Control on the FSN-150” section on page 349 for details.

Following are descriptions of each M/E 1 and M/E 2 Enable:

•{BG Bus} — stores or recalls the source selected on the M/E’s BG bus.

Note

The {BG Bus} button does not store or recall input settings. It only stores or recalls the source. Use “System” enables to store and recall input settings.

•{PST Bus} — stores or recalls the source selected on the M/E’s PST bus.

•{Key 1} — stores or recalls all settings for Keyer 1, plus the selected key source.

•{Key 2} — stores or recalls all settings for Keyer 2, plus the selected key source.

180 FSN Series • User’s Guide • Rev 01