Barco 26-0702000-00 manual Caution Refresh All Native Input Sync, Menu Orientation

Models: 26-0702000-00

1 474
Download 474 pages 62.9 Kb
Page 207
Image 207
Caution Refresh All Native Input Sync

Freeze

Mode

Field 1

Error

Reporting

On

Refresh

All

Sync

5. Menu Orientation

System Menu

For interlaced native resolutions only, press {Freeze Mode} to display the Freeze Mode Pop-up. The following “freeze mode” options are available:

~Field 1 — freezes the source on field 1.

~Field 2 — freezes the source on field 2.

~Frame — freezes an entire frame. Note that with this selection, interfield motion may be present in the frozen image.

Note

The {Freeze Mode} button does not appear when a

 

progressive native resolution is set, nor does it appear when

 

a UIC input is selected.

 

 

Use the {Error Reporting} button to toggle error reporting on or off on a connector by connector basis.

~When on, if an input experiences an error, the associated BNC turns red on the rear I/O view. In addition, the input’s Programmable Display turns red, and the “Error” button appears.

~When off, the input’s Programmable Display remains green, the red

Error” button does not appear, and the error message is removed from the list in the View Errors Menu. The connector, however, remains red.

Note

You can also use this button to turn error reporting off, after

 

an error has occurred and you have acknowledged it.

 

 

In Chapter 7, refer to the “Understanding Error Messages” section on page 316 for more information.

Press {Refresh All Sync} to display the Refresh Sync Pop-up, which can be used to refresh the input sync processing for all native inputs.

Caution Refresh All Native Input Sync

Refresh the input sync mode for all native inputs set to Auto mode?

Note: Only native inputs set to Auto mode will be affected.

Yes

 

No

 

 

 

Figure 5-86.Refresh Sync Pop-up

~Press {Yes} to refresh the sync processing for all native inputs whose sync mode is set to Auto (on the Input Setup Menu). Native inputs that are set to Frame Sync or Minimum Delay modes will not be affected.

~Press {No} to cancel the procedure safely.

FSN Series • User’s Guide • Rev 01

 

207

 

Page 207
Image 207
Barco 26-0702000-00 manual Caution Refresh All Native Input Sync, Menu Orientation, FSN Series • User’s Guide • Rev