Barco 26-0702000-00 manual 10Trim +, 11Enter, 12Decimal, Menu Orientation

5. Menu Orientation

Using the Keypad

10)Trim +

Enter an offset value using the numeric buttons, then press {Trim +} to add to the parameter’s current value. Pressing {Enter} is not required, and the “trim” value remains in the register, enabling you to trim repeatedly by the same offset. Once the value is trimmed, you can close the Keypad, or perform addition trims or entries in the normal way.

For example:

STo add 10 frames to a transition rate, press the Rate button for the desired M/E, then in the Keypad, press {1, 0, Trim +}.

STo add 2 pixels to a mask value, press the desired mask edge (e.g., {Mask Bottom}), then in the Keypad, press {2, Trim +}.

11)Enter

Press {Enter} to accept a new value. When pressed, the Keypad remains open, and the new value is immediately active.

12)Decimal

Press the decimal button {.} as required for numeric entries that accept decimal values.

Note

The decimal button is only applicable when certain Keypad functions that accept decimal values are active.

Please note the following important points regarding the Keypad:

•Certain Keypad buttons may be grayed out, if their function is not applicable for the current operation.

•On several Keypads throughout the system, a “Default Value” button appears. When pressed, the parameter’s values are returned to their defaults, and the Keypad remains open.

•Other types of Keypads are used in various system modes, to present arrays of functions from which to select, and to present lists from which you can select various items. For example:

SWhen selecting output formats on the Output Setup Menu, a special “list” Keypad enables you to select the desired output format from a list of all available output formats.

SWhen mapping sources to buttons, using the Map Buttons Menu, a special “list” Keypad enables you to select the source that you want to map to the selected control panel button.

Each of these “special” Keypads will be discussed in context with their respective features.

146 FSN Series • User’s Guide • Rev 01