Barco 26-0702000-00 manual Multiviewer Operations, Multiviewer Menu Orientation

9. Multiviewer Operations

Multiviewer Menu Orientation

Output

Setup

Select Layout

Select Colors

Clock Setup

Mode

ON

Assign Source

UMD

Text

UMD Color

UMD 1

•UMD Text — Indicates the current text string shown in the corresponding UMD. Use the {UMD Text} button to change the text (maximum eight characters).

•Color — Indicates the specific color assigned to the selected PIP’s UMD. Four color selections are available, as configured on the Select Colors Menu. Use the {UMD Color} button to change the assigned color.

•Clock — If a clock is available in the layout, a special “Clock” row appears at the bottom of the table. Highlighting this row enables you to turn the clock on and off.

The following functions are provided in the Tool Bar:

To set up the Multiviewer’s output, press {Output Setup} to display the Multiviewer Output Setup Menu. This menu sets the resolution for both MVR outputs. Refer to the “Multiviewer Output Setup Menu” section on page 417 for details.

To select a single or dual Multiviewer layout from the library of pre-configured layouts, press {Select Layout} to display the Select Layout Menu. Refer to the “Select Layout Menu” section on page 418 for details.

To set colors for the Multiviewer’s background, PIP borders, clock and four UMD color selections, press {Select Colors} to display the Select Colors Menu. Refer to the “Select Colors Menu” section on page 420 for details.

To set up the Multiviewer’s clock, press {Clock Setup} to display the Clock Setup Menu. Refer to the “Clock Setup Menu” section on page 421 for details. Note that the time is set on the User Preferences Menu.

To turn a PIP on or off in the selected layout, highlight the row that corresponds to the desired PIP, then press {Mode}. In the pop-up, select On or Off. When a PIP is off, its source, color, and UMD text assignments remain unchanged.

To assign a source to a PIP, highlight the row that corresponds to the desired PIP, then press {Assign Source} to display the Assign Source Keypad. Refer to the “Assign Source Keypad” section on page 422 for details.

To change UMD text, highlight the row that corresponds to the desired PIP, then press {UMD Text} to display the Pop-up Keyboard. Enter the desired text, up to eight characters in length. In Chapter 5, refer to the “Using the Pop-up Keyboard” section on page 147 for details on keyboard operations.

To change UMD color, highlight the row that corresponds to the desired PIP, then press {UMD Color}. In the pop-up menu, select one of the four available UMD colors. Note that the color of each button reflects the colors selected on the Select Colors Menu. Refer to the “Select Colors Menu” section on page 420 for details.

Note	UMD colors can be used to “group” sources. For example, if
	you want to visually distinguish your cameras from other
	Multiviewer sources, create and assign a custom UMD color.

416 FSN Series • User’s Guide • Rev 01