Barco 26-0702000-00 manual jLb=_~åâ, 1 2 3 4, Control Panel Orientation, 1Programmable Displays

3. Control Panel Orientation

Control Panel Descriptions

jLb=_~åâ

An M/E bank is essentially a video layer which, in combination with other switcher banks, enables you to create the overall “look” of your program. Please note:

•

•

Three buses are provided for selecting sources: BG, PST and KEY.

Sources are the same in each vertical column of buttons. For example, if CAM 2 is mapped to button 2, CAM 2 appears on button 2 on all switcher buses.

•The M/E bank has an associated M/E Transition Section to the right. In this section, you set up “effects” and transitions using the sources selected in the M/E.

•

•

Using the Memory/Transition Section, you can store all or part of an M/E bank.

An M/E bank provides tally indications. In Chapter 7, refer to the “Understanding Tally” section for details.

•An M/E bank operates in “flip-flop” mode. In Chapter 7, refer to the “Understanding Flip-flop Mode” section on page 314 for details.

•Button color has important significance. In Chapter 7, refer to the “Understanding Button Color” section on page 311 for details.

Note

When M/E 2 control is enabled on the FSN-150, M/E 1 buttons temporarily become M/E 2 buttons, and operations are identical to M/E 1. In Chapter 7, refer to the “M/E 2 Control on the FSN-150” section on page 349 for details.

The figure below illustrates the M/E Bank on the FSN-150.

1

2

3

4

M/E

CAM1

CAM2

CAM3

VTR1

VTR2

DVD1

PC1

PC2

STL1

STL2

GFX1

GFX2

VTR3

DVD2

PC3

COL1

COL2

SEL

K

BLACK

SHIFT

KEY 1

5

KEY 2

E

Y

CUSTOM

B

BLACK

SHIFT

6

G

P

BLACK

SHIFT

S

T

	Figure 3-11.	M/E Bank, FSN-150 (with sample displays)
1)	Programmable Displays		3)	Background Bus	5)	Key Control Section
2)	Key Bus		4)	Preset Bus	6)	SHIFT Buttons

Following are descriptions of each section:

1)Programmable Displays

Above each button on the Key Bus, a Programmable Display shows the source names that are assigned during setup. The labels are dynamic — if the source is mapped to another button, the label follows. Please note:

~In the Programmable Displays, the top row is the unshifted source, the bottom row is the shifted source.

~When M/E 2 control is enabled on the FSN-150, all Programmable Displays turn orange.

FSN Series • User’s Guide • Rev 01 81