Discover FSN-1400

Discover

FSN- 1400

5. Menu Orientation

System Menu

Subnet Mask — lists the subnet mask of the associated Ethernet port. This address can be changed using the {Set Subnet Mask} button.

MAC — lists the MAC address of the associated Ethernet port.

In the Tool Bar, the following operations can be performed on the highlighted port:

If the Status column in the Ethernet Status Table reads “Not Connected” for any reason, use the “discover” process to locate the IP address(es) of all FSN-1400 units within your local network. This action might be required, for example, if the IP address of a particular unit was changed.

Press {Discover FSN-1400}to display the following pop-up:

Note

Discover FSN-1400

 

Close

 

 

 

 

 

 

Please wait while the system discovers FSN-1400 units …

Figure 5-73.Discover FSN-1400 pop-up

During this interval, the system searches the network for FSN-1400systems, and the FSN-1400 Selection Keypad appears:

Select the FSN-1400 to which

Close

you want to connect

 

Device

IP Address

FSN-1400

192.168.0.5

FSN-1400

192.168.0.8

FSN-1400

192.168.0.21

Connect

Figure 5-74.FSN-1400 selection keypad (sample)

In the Keypad, touch the desired FSN-1400, and then press {Connect}.

FSN Series • User’s Guide • Rev 01

 

195

 

Page 195
Image 195
Barco 26-0702000-00 manual Discover FSN-1400, Menu Orientation, FSN Series • User’s Guide • Rev