bå~ÄäÉë=jÉåì=aÉëÅêáéíáçå

5. Menu Orientation

Memory Menu

bå~ÄäÉë=jÉåì=aÉëÅêáéíáçå

From the Memory Menu, press {Enables} to display the Enables Menu, as shown below in the View Mode.

Figure 5-60.Enables Menu, View Mode (sample)

The Enables Menu provides a close-up view of the “selected” register only, and all of its associated Enables. The menu can be accessed in all modes (View, Store and Recall), but not all functions are available, depending on the mode.

Within an individual module, Enables themselves are arrays of sub-functions which can be toggled on or off as desired. For example:

If you store a register that includes the M/E 1 module, there are seven Enables within that module that divide the M/E into its various functional components.

You can elect to leave all enables on (and thus store or recall the entire M/E), or you can elect to turn specific Enables on or off (and thus store or recall only a portion of the M/E). Refer to the “Enable Descriptions” section on page 180 for a complete explanation of each module’s Enables.

The Enables Menu is divided into three sections:

Register Table — The top portion of the menu provides the same table as the Memory Menu, but only the selected register is shown on a single line. All column headings are identical, including the space above the three left-hand columns — which is reserved for the large STORE and RECALL labels.

178

 

FSN Series • User’s Guide • Rev 01

 

Page 178
Image 178
Barco 26-0702000-00 manual bå~ÄäÉë=jÉåì=aÉëÅêáéíáçå, Menu Orientation, FSN Series • User’s Guide • Rev