jÉãçêó=jÉåì=^ÅÅÉëë

5. Menu Orientation

Memory Menu

jÉãçêó=jÉåì=^ÅÅÉëë

There are two ways to access the Memory Menu:

In the Menu Bar, press {Page} to display page 2 (if required). Then, press the {Memory} button.

Press and hold either the STORE or RECALL button in the control panel’s Memory Section.

When either of the two methods above are used, the following rules apply:

If neither the STORE nor the RECALL button is lit, you will access the menu in View Mode.

If STORE is lit, you will access the menu in Store Mode.

If RECALL is lit, you will access the menu in Recall Mode.

Note

Regardless of the mode, you will always return to the last menu used, either the Memory Menu or the Enables Menu. For example, if you are working on the Enables Menu and you jump over to the Transition Menu, you will return to the Enables Menu.

Important

Remember that you can store and recall memory registers by using the Memory Section on the control panel only — without accessing the Memory Menu. In this “panel only” mode, you can select registers and modules, but you cannot modify any Enables. Please note:

If you store a register using the control panel’s Keypad only (without using the Memory Menu), all Enables will be on.

If you recall a register using the control panel’s Keypad only (without using the Memory Menu), all Enables will be on — exactly as stored in the register.

FSN Series • User’s Guide • Rev 01

 

175

 

Page 175
Image 175
Barco 26-0702000-00 manual jÉãçêó=jÉåì= ÅÅÉëë, Menu Orientation, FSN Series • User’s Guide • Rev