Barco 26-0702000-00 råÇÉêëí~åÇáåÖ=_ìííçå=`çäçê, •PGM Bank Rules, • M/E Bank Rules, Operations

7. Operations

Understanding Button Color

råÇÉêëí~åÇáåÖ=_ìííçå=`çäçê

The tables in this section explain the use of color on the buttons in the M/E bank and the PGM bank. The rules apply to the buttons on each bank’s PGM, PST and KEY buses.

•PGM Bank Rules

Table 7-1.PGM bank button rules

Button Color		Description
Off	The button is not mapped.
Dim Amber	The button is mapped but not selected. Brightness in this state is
	set by the Control Panel Backlight function on the User
	Preference Menu.
Green	•	The button is selected on PST.
	•	The bus is not contributing to PGM bank output.
Red	•	The button is selected on PGM, which always contributes
	•	to the output of the bank.
		The button is selected on PST, and the bus is contributing
	•	to the PGM bank output — e.g, during a mix or a wipe.
		Note: The button is dim red when FTB is on.

• M/E Bank Rules

Table 7-2.M/E bank button rules

Button Color		Description
Off	The button is not mapped.
Dim Amber	The button is mapped but not selected. Brightness level in this
	state is set by the Control Panel Backlight function on the User
	Preference Menu.
Green	•	The button is selected on the M/E’s PST and/or KEY bus.
	•	The bus is not contributing to the output of the M/E bank or
		the PGM bank (via re-entry).
Coral	•	The button is selected on the M/E’s BG and/or KEY bus,
	•	and the bus is contributing to the M/E bank’s output only.
		The button is selected on the M/E’s PST bus, and the bus
		is contributing to the M/E bank’s output only — for
		example, during a mix or a wipe.
Red	•	The button is selected on the M/E’s BG and/or KEY bus,
		and the bus is contributing to the PGM bank’s output via
	•	re-entry.
		The button is selected on the M/E’s PST bus, and the bus
		is contributing to the PGM bank’s output via re-entry — for
	•	example, during a mix or a wipe.
		Note: The button is dim red when FTB is on.

FSN Series • User’s Guide • Rev 01 311