Barco 26-0702000-00 manual Control Panel Orientation, Control Panel Descriptions For example

3. Control Panel Orientation

Control Panel Descriptions

For example:

BG

DSK

SIf BG and DSK are currently lit, pressing BG turns the BG button on, and turns the DSK button off.

SIf DSK is currently lit, pressing BG and DSK turns the BG and DSK buttons on.

Following are descriptions of each button in the Next Transition Group:

~Enable BG to arm the background layer for a transition.

•When BG is on, the selected PST source appears in the bank’s preview monitor output. When the transition is performed, the PST source flips to PGM.

•When BG is off, the selected PST source does not appear in the preview monitor output. The current PGM source is held during the next transition — even if a different source is selected on PST.

~Enable DSK to arm a transition to or from the DSK layer, using the source selected on the Phantom Key Bus. The red LED above the button lights when the DSK is on.

•If the DSK is currently off and you enable it, the next transition turns the key on. The key source appears in the bank’s preview output.

•If the DSK is currently on and you enable it, the next transition turns the key off. Here, even though the key is on, the key is removed from preview — showing the bank’s next look.

•Press and hold DSK to display the Key Menu, with the DSK highlighted.

If DSK is off and BG is on, the key will not transition. If the key is currently off, it stays off. If the key is currently on, it holds.

Note	The Key Menu can be used at any time to adjust DSK
	parameters, whether or not the key is on. In Chapter 5, refer
	to the “Keyer Menu” section on page 157 for details.

The following rules apply to both buttons in the Next Transition Group:

~As you enable or disable buttons in the group, the selected layer appears (or is removed) on the bank’s Preview output.

~At the end of a transition (either manual or automatic), all buttons that you enabled in the group remain on. This allows you to transition back to the previous look.

~Both buttons work in combination with the bank’s MIX, WIPE, CUT, AUTO TRAN button and the T-Bar. For example:

S If you arm BG and MIX, and then press AUTO TRAN, the transition automatically mixes to the selected source.

SIf you arm DSK, BG and WIPE, and then move the T-Bar, the transition manually wipes to the selected source plus DSK.

SIf you arm DSK and then press CUT, the DSK cuts on or off.

In Chapter 7, refer to the “Understanding Lookahead Preview” section on page 319 for additional information about lookahead preview functionality.

78 FSN Series • User’s Guide • Rev 01