Barco 26-0702000-00 manual Menu Orientation, FSN Series • User’s Guide • Rev

5. Menu Orientation

Memory Menu

•The eight right-hand columns (under the Modules heading) indicate which modules are included in each register. These columns correspond to the eight categories of modules available on the panel: M/E 1, M/E 2, PGM, SYS (System), Cust (Custom), Still, Aux and DVE. In Chapter 3, refer to the “Memory Section” heading on page 94 for a description of each module.

Please note:

~An “x” in a cell indicates that the module is included in the register. The “x” does not indicate the status of the Enables within the module.

~A blank cell indicates that the module is not part of the register.

~If a column heading is grayed out, that module is not currently available.

Note

The Cust and Still modules are not available in version 3.0.

•In the table, the yellow highlight indicates the selected register. There are many ways that you can select registers, including touching, scrolling with the top knob, and pressing the {Memory Register} value button. Refer to the “Selecting Registers” section on page 183 for details on all selection methods.

•Press {Description} to display the keyboard, which enables you to enter a register description (or name). Refer to the “Naming Registers” section on page 184 for details.

•Press {Enables} to display the Enables Menu, which allows you to view or modify the Enables within each module. Refer to the “Enables Menu Description” section on page 178 for details.

•Press {Advanced} to display the Advanced Memory Menu, which allows you to delete and lock registers. Refer to the “Advanced Memory Functions” section on page 185 for details.

FSN Series • User’s Guide • Rev 01 177