Barco 26-0702000-00 manual Menu Orientation, System Menu, FSN Series • User’s Guide • Rev

5. Menu Orientation

System Menu

~Press {Source V Size} or use the knob to change the source image’s vertical size.

~Press the {Lock} button to lock or unlock H and V source size tracking. When locked, both parameters track together. When unlocked, H and V can be adjusted independently.

Mask

~Press {Source H Pos} or use the knob to change the source image’s horizontal position along the X axis.

~Press {Source V Pos} or use the knob to change the source image’s vertical position along the Y axis.

~Press {Reset} to reset all source pan and zoom values to default.

•In the Input Sizing and Scaling section, press {Mask} to display four “manual” mask value buttons, plus the convenient Mask Presets section. These functions enable you to mask (crop) the top, bottom, left, and right edges of the universal input. When a mask is applied on a selected edge, black is revealed in each masked section. All values are in percent, and the range is 0.00 to 100.0.

The following manual mask controls are provided:

~Press {Mask Top} or use the adjacent knob to manually mask the top edge of the universal input.

~Press {Mask Bottom} or use the knob to manually mask the bottom edge of the universal input.

~Press {Mask Left} or use the knob to manually mask the left edge of the universal input.

~Press {Mask Right} or use the knob to manually mask the right edge of the universal input.

~Press {Reset} to reset all mask values to default.

The figure below illustrates the Mask Presets section, which appears when {Mask} is pressed:

Mask Presets

16:9

5:4

4:3

3:2

1:1

Figure 5-99.Mask Presets Section

Note

All mask presets are additive. For example, if you mask to 16:9 and then press 4:3, the system creates the 4:3 mask using the previous 16:9 image as a base.

The following preset functions are provided:

~Press {16:9} to mask the input to a 16:9 aspect ratio.

~Press {5:4} to mask the input to a 5:4 aspect ratio.

~Press {4:3} to mask the input to a 4:3 aspect ratio.

~Press {3:2} to mask the input to a 3:2 aspect ratio.

~Press {1:1} to mask the input to a 1:1 aspect ratio.

222 FSN Series • User’s Guide • Rev 01