6. System Setup

Aux Setup

„Sizing and Scaling — Use the following steps to set up UOC sizing and scaling:

1.On the Aux Setup Menu, press the UOC Aux connector that you want to set up.

2.Press {Setup} to display the UOC Setup Menu for the selected output.

3.Press {Sizing and Scaling} to display the Output Sizing and Scaling Panel.

4.Press {Size and Position}, then use the {H Size}, {V Size}, {H Position} and {V Position} controls to adjust the output’s size and position.

5.If desired, in the Quick Adjust section, use the {Fill H}, {Fill V} and/or {Fill H/V} controls to scale the output.

6.If desired, press {Aspect Ratio}, then select the desired aspect ratio in the Aspect Ratio Pop-up.

7.To size and position the video within the boundaries of the output, press {Pan Zoom Source}. Use the {Source H Size}, {Source V Size}, {Source H Pos} and {Source V Pos} controls to size and position the video.

8.Press {Mask}, then use the {Mask Top}, {Mask Bottom}, {Mask Left} and {Mask Right} controls to mask selected portions of the output, as required.

9.If desired, in the Output Mask Presets section, select the desired preset — and remember that all mask presets in this section are additive.

10.Press {Back} to return to the Aux Setup Menu.

„Color Correction — Use the following steps to set up UOC color correction:

1.On the Aux Setup Menu, press the UOC Aux connector that you want to set up.

2.Press {Setup} to display the UOC Setup Menu for the selected output.

3.Press {Color Correct} to display the Output Color Correction Panel.

4.To adjust the output’s brightness, contrast and gamma, press {Bright Contrast Gamma}. Use the {Bright}, {Contrast} and {Gamma} controls as desired.

5.To adjust the output’s RGB brightness, press {RGB Bright}. Use the {Red Bright}, {Green Bright} and {Blue Bright} controls as desired.

6.To adjust the output’s RGB contrast, press {RGB Contrast}. Use the {Red Contrast}, {Green Contrast} and {Blue Contrast} controls as desired.

7.To adjust hue and color saturation, press {Hue Sat}. Use the {Hue} and {Sat} controls as desired.

8.Press {Back} to return to the Aux Setup Menu.

300

 

FSN Series • User’s Guide • Rev 01

 

Page 300
Image 300
Barco 26-0702000-00 manual System Setup, FSN Series • User’s Guide • Rev