Barco 26-0702000-00 manual 13DSK Cut In, 14DSK Fill in, 15Native Aux Outputs, FSN-1400Orientation

2. FSN-1400 Orientation

Card Descriptions

13)DSK Cut In

One BNC is provided for a dedicated DSK Cut Input. The DSK Cut and DSK Fill inputs must be locked to the FSN-1400 video reference within ± 0.5 lines, when the {Output V-Lock}button is turned off (on the Reference and Output Setup Menu). See the DSK Fill In description below for an important note.

14)DSK Fill in

One BNC is provided for a dedicated DSK Fill Input. The DSK Cut and DSK Fill inputs must be locked to the FSN-1400 video reference within ± 0.5 lines, when the {Output V-Lock}button is turned off.

Important

When the {Output V-Lock}button is turned on (on the Reference and Output Setup Menu), the position of the DSK Cut and DSK Fill inputs on screen will change.

•If the user preference “Black on Invalid Video” is turned on, the DSK turns off — because of the change in output timing.

•If the user preference “Black on Invalid Video” is off, the DSK will be visible — but in a shifted position. In this condition, the video position can be adjusted by changing the output timing of the DSK source itself.

In Chapter 5, refer to the “User Preferences Menu” section on page 254 for details on the Black on Invalid Video mode.

15)Native Aux Outputs

Six BNCs are provided for the system’s six Native Aux Outputs. Source selection is performed in the Aux Assign Section on the panel. In Chapter 3, refer to the “Aux Section” heading on page 71 for details.

FSN Series • User’s Guide • Rev 01 51