Barco 26-0702000-00 manual aáÖáí~ä=sáÇÉç=bÑÑÉÅíë=`~êÇ, FSN-1400Orientation

2. FSN-1400 Orientation

Card Descriptions

aáÖáí~ä=sáÇÉç=bÑÑÉÅíë=`~êÇ

„Card status: Optional

„Installs in slots: 9, 10

„Maximum number of cards per chassis: 2

The DVE (Digital Video Effects) card is an optional 2-D two-channel scaler card. When one or two DVE cards are installed, the DVE Assign Menu enables you to assign DVE channels to any keyer on the control panel. Then, using the DVE Menu, you can create single keyframe and two keyframe DVE effects.

The following rules apply:

•One DVE card provides two internal DVE channels.

•Two DVE cards provide four available internal DVE channels.

•DVE channels can be assigned to a keyer’s “cut” and/or “fill” inputs. This feature provides a great deal of flexibility. For example:

~To “fly” a PIP or a luma key, one DVE channel is required. Assign a DVE channel to the desired keyer’s “cut” signal.

~To “fly” a linear key, two DVE channels are required. Assign DVE channels to the desired keyer’s “cut” and “fill” signals.

~To “fly” a split key, either one or two DVE channels are required (depending on the effect you want to create). Assign channels to the desired keyer’s “cut” and/or “fill” signals.

Please note:

•A rear panel is not required with the DVE card — a blank panel is installed instead.

•Because DVE channels are assigned to specific keyers, input selection for the channels is performed on the keyer’s associated key bus — in the same way that key sources are selected.

•LEDs on the DVE card’s front edge provide power and FPGA status. Refer to the “Card LEDs” section on page 64 for details.

Refer to the “Card Slot Allocation and System Flexibility” section on page 35 for details on DVE card configurations in the FSN-1400. Refer to Chapter 8, “DVE Operations,” for complete information on DVE assignment, DVE menus and operations.

FSN Series • User’s Guide • Rev 01 57