Barco 26-0702000-00 manual Menu Orientation, FSN Series • User’s Guide • Rev

5. Menu Orientation

System Menu

Output Format

Output V-Lock

On

•Press {Output Format} to display the Output Format Keypad, which lists all available output resolutions.

Select the desired output	Close
format from the list

NTSC (480i)

PAL (576i)

1280 x 720p @ 50

1280 x 720p @ 59.94

1920 x 1080i @ 50

1920 x 1080i @ 59.94

1920 x 1080p @ 23.98

1920 x 1080p @ 24

1920 x 1080p @ 25

1920 x 1080p @ 29.97

Apply

Figure 5-79.Output Format Keypad

Each entry is listed using the following convention: Format @ Fv (Hz). Select the desired format and press {Apply} to set the system’s native resolution.

Important	After you press {Apply}, the system displays a pop-up,
	asking that you confirm or cancel the procedure.

In Appendix A, refer to the “Output Formats” section on page 449 for a complete list of all available output formats.

•Press the {Output V-Lock}button to toggle the Output V-Lockmode on or off. This button only appears when the {Reference Input} button is set to External.

~On — In this mode, the {SDI Output Timing} button appears, enabling you to set offsets anywhere relative to the external video reference input, with positive or negative values.

Important	When {Output V-Lock}is On, all native inputs are forced to
	Frame Sync mode, and up to one frame of delay will be
	incurred on all native inputs. In addition, on the Input Setup
	Menu, the {Sync Mode} button is grayed out. Refer to the
	“Input Menu” section on page 202 for more information.

200 FSN Series • User’s Guide • Rev 01