Barco 26-0702000-00 manual _ìííçå=j~é=q~ÄäÉ, Menu Orientation, FSN Series • User’s Guide • Rev

5. Menu Orientation

System Menu

_ìííçå=j~é=q~ÄäÉ

The figure below illustrates the Button Map Table:

Button	Source / Cut	Linear Key Fill
1	CAM1
2	CAM2
3	CAM3
4	CAM4
5	VT-1
6	VT-2
7	DO-1
8
9	CHY1	CHY2
10	CB-1
M/E	M/E 1 PGM

Figure 5-101.Button Map Table (sample)

On the Palette, the Button Map Table lists the current mapping for all shifted and un- shifted buttons, plus the M/E button. Please note:

•The yellow highlight indicates the selected shifted or unshifted button to which a source can be mapped. The highlight tracks the selection that is made with the {Panel Button} knob.

•The blue highlight indicates whether you are mapping a source/cut or a linear key fill. This highlight tracks the two button selections in the Tool Bar — {Map Source/Cut} and {Map Linear Key Fill}.

The following columns of information are provided in the table:

•Button — indicates the selected shifted or unshifted button, plus the M/E button. Press {SHIFT} to change the column labels from 1 - 10 to 11 - 20.

Note

You can map a source to both the un-shifted and shifted function of the M/E button.

•Source/Cut — displays the source (or linear key “cut” signal) that is mapped to the selected panel button. Press {Map Source/Cut} to select and highlight the field in blue.

•Linear Key Fill — displays the linear key “fill” signal that is mapped to the selected panel button. Press {Map Linear Key Fill} to select and highlight the field in blue.

See the “Mapping Luma Keys and Linear Keys” section on page 228 for more details.

FSN Series • User’s Guide • Rev 01 225