Barco 26-0702000-00 manual lìíéìí=~åÇ=mêçÅÉëë=qççä=_~ê=cìåÅíáçåë, ~+H+V ~+H-V ~-H+V ~-H-V

5. Menu Orientation

System Menu

lìíéìí=~åÇ=mêçÅÉëë=qççä=_~ê=cìåÅíáçåë

On the Output and Process Panel, the following functions are provided in the Tool Bar:

DVI

Sync

+H+V

•Press {DVI Sync} to select the polarity of the digital sync output on the DVI connector. The following options are available in the pop-up:

~+H+V

~+H-V

~-H+V

~-H-V

Analog

Type

HV Sync

Analog

Sync

+H+V

Copy

All

Settings

Restore

Default

Settings

•Press {Analog Type} to choose the type of analog sync output desired on the HD-15 connector. The following options are available in the pop-up:

~CVBS

~Y/C

~SOG/Y

~CSync

~HV Sync

•If {HV Sync} is selected on the {Analog Type} button, press {Analog Sync} to select the polarity of the analog sync output on the HD-15 connector. The following options are available in the pop-up:

~+H+V

~+H-V

~-H+V

~-H-V

•Press {Copy All Settings} to copy all settings on the current UOC channel to another UOC output channel. The Copy Settings Keypad appears, which lists all other UOC channels in the frame — except the current channel. Select the desired Aux output, then press {Copy} to complete the process.

•Press {Restore Default Settings} to recall the selected Aux output’s default setup parameters back into the output’s “temporary” settings on the menu. Note that all settings on the Advanced UOC Setup Menu are also set to default.

246 FSN Series • User’s Guide • Rev 01