Barco 26-0702000-00 manual jìäíáîáÉïÉê=pÉíìé=jÉåì, Multiviewer Operations

Models: 26-0702000-00

1 474
Download 474 pages 62.9 Kb
Page 415
Image 415
Manual background

9. Multiviewer Operations

Multiviewer Menu Orientation

jìäíáîáÉïÉê=pÉíìé=jÉåì

From the System Menu, press {Multiviewer Setup} to show the Multiviewer Setup Menu, a sample of which is shown below.

Figure 9-1.Multiviewer Setup Menu (sample)

The Multiviewer Setup Menu enables you to configure the Multiviewer’s layout, overall appearance, and the sources within each PIP. On the menu:

The left side of the Palette shows a graphic that represents the currently selected single or dual-monitor layout. The current output format is listed above the graphic. The right side shows the Multiviewer Table.

In the layout graphic, each PIP is assigned a number (between 1 and 16) that corresponds to its associated row in the Multiviewer Table. To select a PIP to set up or change, use the top Knob to select the desired row in the table, or simply touch the row. This paradigm is identical for both single and dual-monitor layouts.

The Multiviewer Table provides the following information:

PIP # — Indicates the corresponding PIP number in the layout graphic. If a row is highlighted, the selected PIP can be changed or modified.

Mode — Indicates if the corresponding PIP is on or off (hidden). Use the {Mode} button to change the PIP’s mode.

Source — Indicates the video source assigned to the PIP. Use the {Assign Source} button to change the PIP’s video source.

FSN Series • User’s Guide • Rev 01

 

415

 

Page 415
Image 415
Barco 26-0702000-00 manual jìäíáîáÉïÉê=pÉíìé=jÉåì, Multiviewer Operations, FSN Series • User’s Guide • Rev