Barco 26-0702000-00 ìíçã~íáÅ=asb=qêáÖÖÉê=oìäÉë, DVE Operations, FSN Series • User’s Guide • Rev

8. DVE Operations

Automatic DVE Triggering

^ìíçã~íáÅ=asb=qêáÖÖÉê=oìäÉë

This section outlines the important rules for using automatic DVE triggers in the M/E.

•Only dual keyframe DVE effects can be triggered. However, both single and dual keyframe DVE effects can be mixed and wiped without triggers, in the same way that regular keys are mixed and wiped.

•The following conditions must be met for the FX TRIG button to light:

~One or two DVE cards must be installed in the FSN-1400.

~A DVE channel must be assigned to the selected keyer.

~The DVE mode in the Key Menu must be “on.”

~A dual keyframe effect must be loaded in the selected DVE channel.

•For error-free triggering:

~Always select your layers first, in the Next Transition Group.

~Always select your effects second, in the Effects Group.

•After each effect runs, the FX TRIG button remains lit, enabling you to run the effect repeatedly — forwards and backwards. To cancel the trigger:

~Press MIX to return to standard mix mode.

~Press WIPE to return to standard wipe mode.

~“Tap out” the desired effect. Refer to the “Tap In, Tap Out Functions” section for details.

•For each trigger combination, press AUTO TRAN to run the effect forward (if the effect is on keyframe 1), or backward (if the effect is on keyframe 2).

Please continue with the “Using Automatic DVE Triggers” section on page 401.

400 FSN Series • User’s Guide • Rev 01