cpk=pÉêáÉë=bíÜÉêåÉí=`çååÉÅíáçåë

2. FSN-1400 Orientation

Card Descriptions

cpk=pÉêáÉë=bíÜÉêåÉí=`çååÉÅíáçåë

This section provides information on all FSN Series Ethernet connections.

 

Switch

 

 

Ethernet Port 1

Ethernet

 

FSN-150

FSN-1400

 

 

Figure 2-6.Basic system Ethernet diagram

 

FSN-1400

 

The FSN-1400 has a single Ethernet port located on the System card. This port connects to Ethernet Port 1 on the FSN-150 or FSN-250 control panel, either directly or via an Ethernet switch. By default, the following conditions are set:

~

~

~

DHCP = OFF

Default IP address: 192.168.0.4

Default Netmask: 255.255.255.0

The user can use the default address, or set a different address.

FSN-150and FSN-250control panels

Each control panel has two Ethernet ports located on the rear panel:

~Ethernet Port 1 connects to the FSN-1400, either directly or via an Ethernet Switch. By default, the following conditions are set:

DHCP = OFF

Default IP address: 192.168.0.5

Default Netmask: 255.255.255.0

The user can use the default address, or set a different address.

~Ethernet Port 2 can be connected to an outside network, or to your facility’s “house” network. By default, the following conditions are set:

DHCP = ON

An IP address can be obtained automatically from the outside network.

Use the Com Setup Menu to change IP addresses. In Chapter 6, refer to the “Communications Setup” section on page 285 for details.

48

 

FSN Series • User’s Guide • Rev 01

 

Page 48
Image 48
Barco 26-0702000-00 manual cpk=pÉêáÉë=bíÜÉêåÉí=`çååÉÅíáçåë, FSN-1400Orientation, ~ ~ ~, FSN Series • User’s Guide • Rev