Button Test Mode

Button

Test

Mode

Display

Backlight

Test Off

Display

Pixel Test

Test Off

5. Menu Orientation

System Menu

Press {Button Test Mode} to display the Button Test Mode Pop-up.

 

Button Test Mode

 

Panel

Close

 

 

 

 

 

 

Press any button on the control panel. Results are listed below.

Scan code:

Figure 5-128.Button Test Mode Pop-up

Press any button on the panel to display its scan code in the pop-up. Press {Close} to conclude the test.

Press {Display Backlight} to show the Display Backlight Pop-up, which enables you to test the backlight of all control panel displays. The following options are available:

~Press {All On} to turn all displays on at full brightness.

~Press {All Off} to turn all displays off.

~Press {Red On} to turn all bus displays bright red. The transition displays do not have a red component.

~Press {Green On} to turn all displays bright green, including the transition displays.

~Press {Test Off} to conclude the test, and return all displays to their previous state, prior to test mode.

Note

In this test mode, the {Display Pixel Test} button is grayed

 

out.

 

 

Press {Display Pixel Test} to show the Display Pixel Test Pop-up, which enables you to test the pixels on all control panel displays. The following options are available:

~Press {All Pixels On} to turn all pixels on all displays on.

~Press {All Pixels Off} to turn all pixels on all displays off.

~Press {Test Off} to conclude the test, and return all displays to their previous state, prior to test mode.

Note

In this test mode, the {Display Backlight} button is grayed

 

out.

 

 

FSN Series • User’s Guide • Rev 01

 

261

 

Page 261
Image 261
Barco 26-0702000-00 manual Button Test Mode, Menu Orientation, FSN Series • User’s Guide • Rev