fåéìí=jÉåì

5. Menu Orientation

System Menu

fåéìí=jÉåì

From the System Menu, press {Input Setup} to display the Input Menu, which enables you to set up both native and universal switcher inputs. The figure below illustrates a sample Input Menu.

Figure 5-81.Input Menu (sample)

The Input Menu is divided in half. The left side of the Palette shows the Rear I/O View, while the right side shows the Input Table.

To set up an input, press the desired connector in the Rear I/O View. In the Input Table, the selected input is automatically highlighted. Once selected, you can name the input, map it to the control panel, and set up a variety of input parameters.

The following topics are discussed in this section:

Rear I/O View Description Connector Colors Input Table Description Input Menu Functions

Input Setup Menu for Native Inputs Input Setup Menu for Universal Inputs Input Setup Menu Tool Bar Functions Input Setup Notes

202

 

FSN Series • User’s Guide • Rev 01

 

Page 202
Image 202
Barco 26-0702000-00 manual fåéìí=jÉåì, Menu Orientation, • • • • • • • •, FSN Series • User’s Guide • Rev