Barco 26-0702000-00 mêçÖê~ããáåÖ=asb=bÑÑÉÅíë, mêçÖê~ããáåÖ=páåÖäÉ=hÉóÑê~ãÉ=bÑÑÉÅíë, DVE Operations

8. DVE Operations

Programming DVE Effects

mêçÖê~ããáåÖ=asb=bÑÑÉÅíë

Programming a single channel or multi-channel DVE effect is a highly creative function that brings all available DVE image manipulation “tools” into play.

SPrerequisite — Ensure that you are familiar with the DVE Menu, and all of its associated tabs and functions. Refer to the “DVE Menu Orientation” section on page 362 for details.

To efficiently program DVE effects, there are three overall sequences to keep in mind — each of which involves additional individual steps:

•Create, store and name “shot box” keyframes for all of your program’s desired positions, locations and looks.

•Create your effects from the shot box keyframes.

•Store the effects in memory, and name them as desired.

The following procedures provide basic programming outlines, which you can use as a starting point, and then customize as required. The following topics are discussed:

•

•

•

Programming Single Keyframe Effects

Programming Dual Keyframe Effects

Creating Dual Keyframe Effects from the Shot Box

mêçÖê~ããáåÖ=páåÖäÉ=hÉóÑê~ãÉ=bÑÑÉÅíë

„Use the following steps to program single keyframe DVE effects:

1.Set up the effect, and key the DVE channel:

a.Navigate to the DVE Menu by pressing {DVE} in the Menu Bar.

b.Using the {DVE} button, select the channel that you wish to program.

c.Press {Effect Setup} to display the Effect Setup Panel.

d.Press {New Effect} to create a new single keyframe effect. The new keyframe 1 is set to full screen center, with no border and no shadow.

e.On the control panel, key the DVE channel, such that it is visible either on Program or Preset.

2.To design the keyframe, manipulate the image as desired, using any combination of the following tools:

a.On the DVE Menu, press {Size and Position} to display the Size and Position Panel. Adjust the channel’s size, position and aspect ratio.

b.Press {Pan Zoom Source} to display the Pan Zoom Source Panel. Adjust the size and position of the source image within the PIP.

c.Press {Mask} to display the Mask Panel. Mask the edges as desired.

d.Press {Border Shadow Opacity} to display the Border Shadow Opacity Panel. Add a border and shadow to the PIP, and adjust opacity.

e.Press {Advanced} to display the Advanced DVE Menu.

f.Press {Color Effects} to display the Color Effects Panel. Adjust the source’s brightness and contrast, and create mono and invert effects.

g.Press {DVE Extras} to display the DVE Extras Panel. Adjust advanced image processing functions, and program freeze, flip and strobe effects.

FSN Series • User’s Guide • Rev 01 391