Barco 26-0702000-00 manual cpkJNQMM=o~ÅâJjçìåí=mêçÅÉÇìêÉ, • • • • • • •, Installation

Models: 26-0702000-00

1 474
Download 474 pages 62.9 Kb
Page 110
Image 110
cpkJNQMM=o~ÅâJjçìåí=mêçÅÉÇìêÉ

4. Installation

FSN-1400 Rack-Mount Procedure

cpkJNQMM=o~ÅâJjçìåí=mêçÅÉÇìêÉ

The FSN-1400 chassis is designed to be rack mounted and is supplied with front rack- mount hardware. Please note the following important points:

The FSN-1400 is 6RU in height.

When rack mounting the unit, remember that the maximum ambient operating temperature is 40 degrees C.

Leave sufficient front and rear space to ensure that airflow through the FSN-1400 is not restricted.

When installing equipment into a rack, distribute the units evenly to prevent hazardous conditions that may be created by uneven weight distribution.

Connect the FSN-1400 only to a properly rated supply circuit.

Reliable grounding (earthing) of rack-mounted equipment should be maintained.

Rack mount the FSN-1400 from the front rack ears using four rack screws (not supplied). Threads may be metric or otherwise, depending upon the rack type.

„Use the following steps to rack mount the FSN-1400:

1.At a minimum, an FSN-1400 chassis weighs 35 pounds (15.87 kg). To avoid injury, it is recommended that two people rack mount the chassis.

2.The FSN-1400 ships with side rails installed, which when properly adjusted, assist with the distribution of chassis (and cable) weight within your rack. Use the following steps to properly adjust the side rails:

a.Measure and install the two supplied mounting brackets on your rear rack rails.

Figure 4-5.Rear rail mounting bracket

b.Measure the distance between the front and rear rack rails. Remove the four mounting screws that secure each side rail to the FSN-1400, then adjust the spacing of each side rail as necessary.

Mounting screws

Chassis rear

Side rail

Figure 4-6.Side rail adjustment

c.Re-install the mounting screws. When properly adjusted, the end of each side rail will protrude through the slot in the rear mounting bracket, once the chassis is rack mounted.

110

 

FSN Series • User’s Guide • Rev 01

 

Page 110
Image 110
Barco 26-0702000-00 manual cpkJNQMM=o~ÅâJjçìåí=mêçÅÉÇìêÉ, • • • • • • •, Installation, FSN Series User’s Guide Rev