Barco 26-0702000-00 manual `çååÉÅíçê=`çäçêë, Info, Close, Menu Orientation, Slot 1, Input

5. Menu Orientation

System Menu

`çååÉÅíçê=`çäçêë

Info

On the Rear I/O Views of the UIC, NIC and M/E panels, the color of the individual input connectors is significant:

•Green indicates that the input is mapped to the control panel, and the signal is OK.

•Red indicates that the mapped input has an “LOS” or “Invalid Signal” error. In this situation, the input’s Programmable Display turns red, and the red “Error” button appears in the top right corner of the Touch Screen. Press the {Error} button to learn more. Refer to the “Notes and Error Messages” section on page 143 for details.

Note	For the input connectors on the NIC and UIC, this “red”
	condition only occurs if the input has been mapped to the
	panel, and the signal was previously OK.
Note
	If desired, use the {Error Reporting} button to turn the red
	error message off, and return the Programmable Display to
	green. In this mode, the connector remains red. In
	Chapter 7, refer to the “Understanding Error Messages”
	section on page 316 for full details.

•Yellow indicates that the input is un-mapped, and a signal is present.

•White indicates that the input is un-mapped, and no input signal has been detected.

The above “color” information is always available on the Input Menu and External DSK Setup Menu. Press {Info} to display the Input Color Legend Pop-up:

Note	Slot 1, Input 8:	Close
	Input color legend
Input mapped, signal OK		Input un-mapped, signal present

Input mapped, error or no signal Input un-mapped, no signal

Figure 5-83.Input Color Legend pop-up

204 FSN Series • User’s Guide • Rev 01