Barco 26-0702000-00 manual mdj=_~åâ, 1Programmable Displays, Control Panel Orientation, • • •

3. Control Panel Orientation

Control Panel Descriptions

mdj=_~åâ

The PGM Bank is the switcher’s top video layer. The bank includes two physical buses (PGM and PST), and one “phantom” KEY bus. Together, these buses are the switcher’s primary location where you cut your program and transition to M/E setups. Please note:

•

•

•

The PGM Bank has an associated PGM Transition Section to its right, where effects and transitions (such as mixes, wipes and keys) are set up using the sources selected in the buses.

Using the Memory/Transition Section, you can store all or part of the PGM bank.

The PGM Bank provides tally indications similar to the M/E. In Chapter 7, refer to the “Understanding Tally” section on page 315 for details.

•The buses in the PGM Bank operate in “flip-flop” mode. In Chapter 7, refer to the “Understanding Flip-flop Mode” section on page 314 for details.

•Button color has important significance. In Chapter 7, refer to the “Understanding Button Color” section on page 311 for details.

The figure below illustrates the PGM Bank on the FSN-150.

1

PGM

CAM1

CAM2

CAM3

VTR1

VTR2

DVD1

PC1

PC2

STL1

STL2

GFX1

GFX2

VTR3

DVD2

PC3

COL1

COL2

2

P

BLACK

SHIFT

M/E

G

M

3

P

BLACK

SHIFT

M/E

S

T

DSK Assign

Figure 3-5.PGM Bank, FSN-150

4

5

1)	Programmable Displays	4)	Re-entry Buttons
2)	Program Bus	5)	SHIFT Buttons
3)	Preset and Phantom Key Bus

Following are descriptions of each section:

1)Programmable Displays

Above each source button on the PGM Bus, a Programmable Display shows the source names that are assigned during setup (e.g., CAM1, VTR2, etc.). The labels are dynamic — if the source is mapped to another button, the label follows.

Note

In the Programmable Displays, the top row is the unshifted source, the bottom row is the shifted source.

If an error occurs to either the shifted or unshifted input, the Programmable Display turns red. In Chapter 7, refer to the “Understanding Error Messages” section on page 316 for full details.

74 FSN Series • User’s Guide • Rev 01