Barco 26-0702000-00 manual 4Effects Group, 5Cut, 6Auto Transition, Control Panel Orientation

Models: 26-0702000-00

1 474
Download 474 pages 62.9 Kb
Page 79
Image 79
4)Effects Group

MIX

3. Control Panel Orientation

Control Panel Descriptions

4)Effects Group

The two buttons in the Effects Group indicate which effects are armed for the next transition in the PGM bank.

MIX

WIPE

Figure 3-10. Effects Group

To use the group, press the button for the transition you want to enable. Note that MIX and WIPE are mutually exclusive.

Following are descriptions of each button in the Effects Group:

~Press MIX to arm the PGM bank for a mix, using the layers enabled in the Next Transition Group. The mix can be performed manually or automatically. Transition combinations are:

Note

MIX + BG: Background mix

MIX + DSK: Mix DSK, on or off

MIX + BG + DSK: Mix background and DSK

After a mix transition has been armed, press and hold MIX to display the Transition Menu, which lets you to set transition rates and curves. In Chapter 5, refer to the “Transition Menu” section on page 148 for details.

WIPE

~Press WIPE to arm the PGM bank for a wipe transition, using the layers enabled in the Next Transition Group. The wipe can be performed manually or automatically. Transition combinations are:

Note

WIPE + BG: Background wipe

WIPE + DSK: Wipe DSK, on or off

WIPE + BG + DSK: Wipe background and DSK

After a wipe transition has been armed, press and hold WIPE to display the Wipe Menu, which lets you to choose wipe patterns and adjust parameters. In Chapter 5, refer to the “Wipe Menu” section on page 151.

CUT

AUTO

TRAN

5)Cut

Press CUT to instantly cut to the PGM bank layers that are enabled in the Next Transition Section. For example:

S BG enabled — press CUT to cut from PGM to PST.

SDSK enabled — press CUT to cut the DSK on or off.

SBG + DSK enabled — press CUT to cut from PGM to PST, and simultaneously cut the DSK on or off.

6)Auto Transition

Press AUTO TRAN to trigger an automatic transition to or from the layers enabled in the Next Transition Group. The transition uses the “type” of transition enabled in the Effects Group, and the PGM bank’s current transition rate. For example:

SBG + MIX enabled — press AUTO TRAN to mix from PGM to PST.

FSN Series • User’s Guide • Rev 01

 

79

 

Page 79
Image 79
Barco 26-0702000-00 4Effects Group, 5Cut, 6Auto Transition, Control Panel Orientation, FSN Series • User’s Guide • Rev