Barco 26-0702000-00 manual jÉãçêó=pÉÅíáçå, 1 2 3, 1Memory Display, Control Panel Orientation

3. Control Panel Orientation

Control Panel Descriptions

jÉãçêó=pÉÅíáçå

The Memory Section enables you to store switcher setups to memory, and recall setups from memory back to the panel. One thousand registers are provided (1 through 1000). In Chapter 7, refer to the “Working with Memory Registers” section on page 337 for details.

The figure below illustrates the Memory Section.

1

2

3

S T R :		1 2 3		T i t l e M a i n
R C L : 4 5 6				B u m p e r 4
STORE	RECALL		AUTO				Fine
			TRAN				Adjust
M/E 1	CUST		7		8	9	CLEAR
M/E 2	STILL		4		5	6	TRIM -
PGM	AUX		1		2	3	TRIM +
SYS	DVE		+ / -		0	.	ENTER

		4
	Figure 3-21.Memory Section
1)	Memory Display	3)	Module Section
2)	Function Section	4)	Keypad

Following are descriptions of each section:

1)Memory Display

The figure below illustrates the Memory Display.

Store Entry Register Recall Entry Register

S T R :	1 2 3	T i t l e	M a	i n
R C L :	4 5 6	B u m p e r 4

Figure 3-22.Memory Display (sample)

~The top line indicates the last memory register that was stored, e.g., STR: 123. The letters STR are constant, followed by the “store” entry register, and the register description (as entered via the Memory Menu).

~The bottom line indicates the last memory register that was recalled, e.g., RCL: 456. The letters RCL are constant, followed by the “recall” register, and the register description (as entered via the Memory Menu).

The following rules apply:

~When you press STORE or RECALL and enter numbers from the keypad, the appropriate register clears, and digits shift left as you type.

94 FSN Series • User’s Guide • Rev 01