Barco 26-0702000-00 fåéìí=pÉíìé=jÉåì=qççä=_~ê=cìåÅíáçåë, fåéìí=pÉíìé=kçíÉë, Menu Orientation

Color

Correct

Save

Settings

Restore

Saved

Settings

Restore

Default

Settings

5. Menu Orientation

System Menu

Remember that once the image is masked as desired, you can use the {Fill H}, {Fill V} or {Fill H/V} functions to scale the image to full screen.

Note	For each mask function, the range shown in the Keypad’s top
	Function Bar is dynamic. For example, if you press {Mask
	Left} and mask 100 pixels from the image’s left edge, when
	you press {Mask Right}, the maximum range is now 100
	pixels less.
Important
	Any time that input timing adjustments are made, the mask
	settings for the selected input will automatically be reset to
	their default values — without any notification on screen.

fåéìí=`çäçê=`çêêÉÅíáçå=m~åÉä

On the Input Setup Menu for universal inputs, press {Color Correct} to display the Input Color Correction Panel. All functions are identical to those for native inputs. Refer to the “Input Color Correction Section” heading on page 210 for details.

fåéìí=pÉíìé=jÉåì=qççä=_~ê=cìåÅíáçåë

For both native and universal inputs, the following functions are provided in the Tool Bar:

•Press {Save Settings} to save the selected input’s setup parameters in non- volatile memory.

•Press {Restore Saved Settings} to recall the selected input’s setup parameters from non-volatile memory. This function effectively allows you to return to the saved settings, after making temporary adjustments.

•Press {Restore Default Settings} to recall the selected input’s default setup parameters back into the input’s “temporary” settings. This function does not over-write the “saved” settings.

fåéìí=pÉíìé=kçíÉë

Please note the following important points regarding input setup:

•Because you can install and set up either a NIC or a UIC in input slots 3 and 4, many creative input combinations are possible. However, if you move or change input card assignments in these two slots during the setup procedure, the setup is invalidated, and must be repeated once the final card configuration is reached.

FSN Series • User’s Guide • Rev 01 223