Barco 26-0702000-00 manual póëíÉã=`çåÑáÖìê~íáçå, _~ëáÅ=cpk=pÉêáÉë=póëíÉã, oÉèìáêÉÇ=`~êÇë, • • • •

NK==fåíêçÇìÅíáçå

About the FSN Series

póëíÉã=`çåÑáÖìê~íáçå

The following topics are discussed in this section:

•

•

•

•

Basic FSN Series System

Required Cards

Optional Cards

M/E Features

_~ëáÅ=cpk=pÉêáÉë=póëíÉã

Because the FSN Series uses modular components, many flexible system configurations can be designed to suit your exact production requirements. The basic system consists of the following:

•

•

•

One FSN-150control panel. One FSN-1400chassis.

One System Card and one Crosspoint M/E Card, both of which are required on all systems. Refer to the “Required Cards” section below for details.

All other cards are optional, including the NIC, UIC, UOC, DVE, NAC and MVR. Refer to the “Optional Cards” section on page 26 for details.

oÉèìáêÉÇ=`~êÇë

Required FSN Series cards are described below.

•System Card — this required card includes:

~Video reference input and loop through.

~Configurable video reference output.

~Ethernet port (10/100).

~One tally connector (24 contact closures).

~One GPIO connector (four GPI ports and eight GPO ports).

In Chapter 2, refer to the “System Card” section on page 44 for details.

•Crosspoint M/E Card — This required card includes:

~Crosspoint matrix.

~M/E and PGM circuitry.

~Dedicated DSK cut and fill inputs.

~Six Aux outputs.

~Four PGM outputs (PGM [2x], PVW and CLN).

~Three M/E 1 outputs (PGM 1, PVW 1 and CLN 1).

~Three M/E 2 outputs (PGM 2, PVW 2 and CLN 2).

In Chapter 2, refer to the “M/E Card” section on page 49 for details.

FSN Series • User’s Guide • Rev 01 25