qJ_~êI=gçóëíáÅâ=~åÇ=håçÄë

5. Menu Orientation

System Menu

T-Bar

Joystick

Knobs

qJ_~êI=gçóëíáÅâ=~åÇ=håçÄë

From the Diagnostics Menu, press {T-Bar Joystick Knobs} to display the T-Bar, Joystick, Knobs Menu. The figure below illustrates a sample menu.

Figure 5-126.T-Bar, Joystick, Knobs Menu (sample)

The T-Bar, Joystick, Knobs Menu enables you to perform diagnostic tests on the T-Bar, Joystick and the four knobs. The two tables at the top provide Joystick and T-Bardata.

Joystick Table — data is listed for the X, Y and Z axes. As you move the Joystick to its maximum limit along each axis, the proper range is -100%to 100%. If the Joystick does not reach these values, or does not display 0% when fully at rest, use the {Re-center}button. See below for details.

T-Bar Table — data is listed for each bank’s T-Bar. As you move each T-Barto its top and bottom limits, the proper range is 0 to 100. If the T-Bardoes not display these values at each limit, use the {Set Top Limit} and {Set Bottom Limit} buttons. See below for details.

The following diagnostic functions are provided on the menu:

Knobs — one data field is provided for each knob. As you rotate a knob, the associated value should range between + 7 and -7, as you rotate the knob clockwise and counter-clockwise, respectively.

258

 

FSN Series • User’s Guide • Rev 01

 

Page 258
Image 258
Barco 26-0702000-00 manual qJ_~êI=gçóëíáÅâ=~åÇ=håçÄë, Menu Orientation, FSN Series • User’s Guide • Rev