Barco 26-0702000-00 manual asb=hÉóÉê=cìåÅíáçåë, Menu Orientation, FSN Series • User’s Guide • Rev

5. Menu Orientation

Keyer Menu

asb=hÉóÉê=cìåÅíáçåë

When a keyer is selected that has a DVE channel assigned (either to the cut signal, the fill signal or both signals), four DVE-specific functions appear on the Palette, as shown below. When a keyer is selected that does not have a DVE assigned, the functions do not appear.

DVE Mode

PIP

KEY

DVE Functions

DVE	DVE
	Menu
On

Figure 5-46.DVE Keyer function buttons (sample)

PIP

KEY

DVE

On

DVE Menu

DVE

Assign

In the DVE Mode section, two mutually-exclusive functions are available:

•Press {PIP} to place the keyer in PIP mode. In this mode:

~The assigned DVE channel defaults to On, and the {DVE} button is grayed out.

~The {Clip}, {Gain}, {Opacity}, {Type} and {Key Fill} controls are automatically grayed out.

~The key source (the input to the assigned DVE channel) is selected on the key bus in the normal manner. The source appears within the PIP, which can now be manipulated on the DVE Menu.

•Press {KEY} to place the keyer in Key mode. In this mode:

~The DVE channel can be turned On or Off using the {DVE} button.

•When On, the key source is routed through the DVE. The source can be manipulated with the DVE Menu, but it can not be bordered or shadowed.

•When Off, the keyer functions normally, with no DVE in line.

~The {Clip}, {Gain}, {Opacity}, {Type} and {Key Fill} controls are active. In the DVE Functions section, two buttons are available:

•Use the {DVE} button to turn the assigned DVE channel On or Off. The button is only active when the keyer is in Key mode. In PIP mode, the button is grayed out and the DVE channel defaults to On.

•Press {DVE Menu} to switch to the DVE Menu for the selected DVE channel (that is assigned to the selected keyer) — enabling you to size, position, and manipulate the key. The button is active in both PIP and Key modes.

In the Tool Bar, one additional DVE-related function is available:

•Press {DVE Assign} to switch to the DVE Assign Menu, which enables you to assign DVE channels to keyers. For complete information on DVE assignments and effect programming, refer to Chapter 8, “DVE Operations” on page 353.

164 FSN Series • User’s Guide • Rev 01