HP Designjet 815MFP tell me about my scanner, tell me about my scanner operator panel and lights, scanner control area

tell me about my scanner

tell me about my scanner operator panel and lights

The scanner’s operator panel shown above is divided into two main areas:

•scanner control area with 1 key and 3 red/green indicator lights.

•paper control area with 2 keys and 1 red/green indicator light.

scanner control area

power button and indicator light

When you connect the scanner to the power outlet it starts up in ON mode: the light is green. With the scanner then connected to the power outlet, you control scanner power through the power switch:

•To turn the scanner from ON to OFF, press down for 1 second until the light is red.

•To turn the scanner from OFF to ON, press down until the light is green.

diagnostics light

Flashes if an error is detected by the built-in diagnostic. Simultaneous flashing by both the Diagnostic and the Wait (Warm- up) lights may mean that that the scanning area needs cleaning. For cleaning instructions see maintenance procedures on page 24.

Restart the scanner after cleaning.

hp designjet 815mfp & scanner 4200 55