HP Designjet 815MFP how do I create a workgroup, to create a workgroup…

Panel. But, in this case, add 50 to the fourth (final) part of the IP address. If the resulting number is greater than 255, change it to 255.

8.Click OK until all dialog boxes have closed. You have now configured your TCP/IP settings.

how do I create a workgroup?

You need to create a workgroup in order to Scan to Network.

to create a workgroup…

1.Press the Quit button and select Exit to exit your scanner system software.

2.Press the System Setup button.

3.Press the Network Domain button. The System Properties window will appear. Select the Network Identification tab.

4.Click the Network ID button. The Identification Changes window will appear.

5.Enter the name of your domain, and the name of the workgroup you wish to create, then click OK.

hp designjet 815mfp & scanner 4200 37